Wechsler scales use a standard deviation of 15, older Stanford-Binet forms used 16, and the Cattell scales use 24. One standing prints as three different numbers — and one printed 140 is a one-in-260 result on one of those scales and a one-in-21 result on another.
Two people compare IQ scores. One says 130, the other says 132, and a third says 148. All three can be describing exactly the same standing in exactly the same population. Nobody has exaggerated and nothing has gone wrong. They have read one position off three different rulers, and none of them mentioned which ruler they used. That single omission is the most common source of confused IQ numbers on the internet, and it is entirely fixable with two lines of arithmetic.
An IQ score is not a count of anything. Nobody holds 130 units of reasoning the way they hold 130 pounds or 130 pence. What a modern test produces is a ranking. The test is given to a large sample chosen to represent a population, everyone's raw performance is put in order, and each person's position in that order is then printed on a scale the publisher settled on in advance. Building that reference sample and fixing that scale is called norming, and it is the step that turns a pile of right and wrong answers into a number anyone can interpret. Our explainer on how IQ tests work covers the rest of that pipeline.
A scale of this kind needs only two settings. The first is where the middle sits, and on essentially every modern test it is 100. The second is how widely the printed numbers are spread out, and that is fixed by the standard deviation — a measure of the typical distance between one individual result and the average, expressed in the same units the results are printed in. Choose 100, choose a standard deviation, and every other number on the scale is decided for you.
So a score of 115 where the standard deviation is 15 sits exactly one standard deviation above average. So does 116 where the standard deviation is 16, and 124 where it is 24. Those are three printings of one position, in the way that 20 degrees Celsius and 68 degrees Fahrenheit are two printings of one temperature. The position itself has a name that survives the translation: the percentile, meaning the share of the reference sample scoring at or below that point. One standard deviation above the mean is the 84.1st percentile whichever of the three scales prints it; only the printed number changes.
Which scale a test uses is a publishing decision, and the field never fully converged on one. The spread below is not exotic history — every one of these scales has scores in circulation today, and readers routinely compare numbers across them without noticing.
A percentile is the fact. An IQ number is only a rendering of it, and a rendering with no scale attached cannot be read.
Because the scales differ only in their spread, translating between them is a matter of stripping the scale out of a score and putting a different one back. Step one: subtract 100, then divide by the standard deviation the score was measured on. What comes out is called a z score — simply the number of standard deviations the result sits above or below average, with no scale attached to it. Step two: multiply that z score by the standard deviation of the scale you want, and add 100 back on.
Four worked examples, using the numbers people actually argue about:
If the z score is a step too many, there is a shortcut that does the same job: multiply the distance from 100 by the ratio of the two standard deviations. Going from 16 to 15 means multiplying by 15 ÷ 16, or 0.9375. Going from 24 to 15 means multiplying by 15 ÷ 24, or 0.625. A 32-point advantage on the standard-deviation-16 scale becomes a 30-point advantage on 15; a 48-point advantage on the Cattell scale becomes the same 30. Doing it by hand is a useful exercise once, after which the IQ score converter will do it faster and without arithmetic slips.
Run a percentile through the same machinery and the reverse trick works. The 98th percentile sits about 2.05 standard deviations above the mean, which is roughly 131 on a standard-deviation-15 scale, roughly 133 on 16 and roughly 149 on 24. That is the whole reason the Mensa entry requirement circulates as three incompatible numbers when it has only ever been one rule. Exactly two standard deviations, meanwhile, is the 97.72nd percentile rather than the 98th, and prints as 130, 132 and 148 on the same three scales — which is where the popular figures come from and why they are all a fraction low.
The most damaging case is the one that needs no conversion at all, because the same number appears on both scales and means something different on each. Take a reported 140. On a standard-deviation-15 scale that is 2.67 standard deviations above average, the 99.6th percentile, about one person in 260. On the standard-deviation-24 Cattell scale the identical figure is 1.67 standard deviations up, the 95.2nd percentile, about one person in 21. Same printed number, and a twelve-fold difference in how unusual it is. You can watch both positions on the same curve using the bell curve visualiser, and get the exact figure for any score with the percentile calculator.
This is not a curiosity for pedants. Almost every recurring dispute about IQ numbers online reduces to two people quoting different rulers at each other, and a few of the failures are expensive.
That last point is the one most often lost in a conversion argument. Getting the scale right moves a number by two or three points; the confidence range around the number is usually wider than that. Both facts matter, and they matter in that order — you cannot reason about the error bar until you know what scale the number is printed on. Our piece on what a single reported score does and does not carry takes that second half further, and how accurate IQ tests are sets out where the error comes from.
When someone quotes a score, three questions recover everything the number left out, and if any of them cannot be answered the figure should be treated as decoration rather than data.
Answer the first and the conversion is mechanical. Answer all three and you have something you can actually compare with another person's result — which is, in the end, the only reason anyone wants a converted number. If you want a current score to run through this yourself, take a properly built assessment under proper conditions on our IQ test and keep the scale, the percentile and the range together with the number.
Never compare two IQ figures without first putting them on the same scale. Convert both to a z score, read both as percentiles against their own reference samples, and only then look at the gap between them — which will usually be smaller than the printed numbers suggested. The score converter handles the SD-15, SD-16 and Cattell translations in both directions, and the percentile calculator turns any of them into the position that actually carries the meaning.
Find your IQ score now! →The habit worth taking away is small and it costs nothing. When a number arrives, ask what it was measured on before you ask what it means. A score with its scale attached is a precise, checkable statement about where somebody stood in a named sample on a named day. The same score with the scale stripped off is not a weaker version of that statement. It is not a statement at all.
It depends on the test. The Wechsler scales and most instruments in current professional use set the mean at 100 and the standard deviation at 15. Stanford-Binet forms up to the fourth edition used 16, as do several group-administered school ability tests, and the Cattell scales use 24. The standard deviation is the typical distance between an individual result and the average, so it controls how far apart the printed numbers are spread — which is why the same standing prints as a different number on each.
Subtract 100, divide by 16, multiply by 15, then add 100 back. A 132 on a standard-deviation-16 scale is exactly two standard deviations above average, which prints as 130 on a standard-deviation-15 scale. The shortcut is to multiply the distance from 100 by 15 ÷ 16, or 0.9375. The same method converts from the standard-deviation-24 Cattell scale by multiplying the distance from 100 by 0.625.
No — they are the same result written twice. Both sit exactly two standard deviations above the mean, which is the 97.72nd percentile of the reference sample. So does 148 on the standard-deviation-24 Cattell scale. Comparing the printed numbers rather than the positions is the single most common way people misread IQ figures.
The report should say so, and a properly written one names both the test and the scale. If it does not, the scale cannot be recovered from the number itself, because the same figure is valid on all of them. Look for the test name first: Wechsler and most current tests report on a standard deviation of 15, older Stanford-Binet forms on 16, Cattell tests on 24. A result that names neither the test nor the reference sample cannot be converted or interpreted.
Corrections: spotted an error? Email corrections@iqmetrics.org and we will update this story and note the change here.
On the scale most modern tests use, 120 sits around the 91st percentile. Change the scale and the same number moves. Add the measurement error every test carries and it stops being a point at all.
Mensa admits at the 98th percentile of a supervised, properly normed test. That single rule produces a different qualifying figure on every scale — and none of them is the 130 the internet keeps repeating.
Our IIF-certified assessment reports your score with its scale, percentile and confidence range — and a breakdown of the cognitive domains behind it.
Start IQ Test →